Insulation Adhesive Tape: PVC SCAPA 2702 (0.13*15mm/10m, blue)

SCAPA 2702 is a 0.13mm thick, lead free, self-extinguishing, plasticized PVC insulation tape using an aggressive pressure-sensitive rubber-based adhesive system. This premium quality product is manufactured in Europe by SCAPA GROUP plc according to international standards and with focus on environmental safety.

• High quality materials ensure maximum longevity;
• Aggressive pressure-sensitive rubber-based adhesive system ensure good adhesion to the substrate;
• High elasticity and (180%) and tensile strength (25N/cm)
• Self-extinguishing PVC;
• Good resistance to abrasion, corrosion and moisture;
• High dielectric strength;
• Approved by IMQ i VDE^*;
• Conforms to BS3924;
• Operating temperature: 0

 

 

Name	Insulation Adhesive Tape: PVC SCAPA 2702 0.13*15mm/10m, blue
Color	blue
	Nominal value	Test method
Thickness [mm]	0.13	CEI EN 60454
Width [mm]	15
Roll length [m]	10
Tensile strength [N/cm]	25	CEI EN 60454
Elongation at break [%]	180	CEI EN 60454
Adhesion to steel [N/cm]	1.8	CEI EN 60454
Dielectric strength [kV/mm]	>40	CEI EN 60454
Operating/installing temperature [oC]	0 ...90	CEI EN 60454
Flammability	self-extinguishing	CEI EN 60454

• electrical cables wrapping,
• color coding,
• cable sealing,
• protection for low and medium voltage (max 600V) cable splices.

NOTICE!

At temperatures below 0^oC use self-amalgamating tapes.

RECOMMENDATIONS:

Rolls should be stored flat in the original packaging. They have to be protected from dust, heat, moisture, direct sunlight and solvent fumes. The storage temperature should be between +10^oC and +25^oC.

The tape should be applied with sufficient tension to ensure an optimum bonding and minimum of two layers with a half overlap. The final layer should be wrapped with a lower tension to prevent flagging effects.

The surfaces should be clean, dry, free of dust, grease, oil or other contaminants.