CAT 5e UTP Cable: NETSET BOX [305m], indoor

NETSET BOX UTP CAT 5e cable is the highest-quality twisted pair cable designed for data transmission systems inside buildings (LANs).

NETSET BOX is the latest generation of NETSET twisted-pair cables.
Its outer diameter has been reduced to 5.0 mm, which considerably facilitates installation of the data cable in trays and pipes. Special insulation material has been selected to make it easier to put on RJ-45 connectors.

Distinguishing features of NETSET BOX UTP cat 5e cable:

• highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee;
• parameters far exceeding the requirements for Category 5e;
• preliminary quality control of materials and thorough tests of the final product;
• meter markers, deviation less than 0.5%;
• 305 m unreel box;
• solid wires of 0.50 mm diameter (24 AWG);
• wire insulation made of homogeneous, highly-insulating, volume-colored PE; outer diameter: 0.88 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue;
• insulated wires twisted in pairs of 1.8 mm diameter;
• pairs twisted together, outer diameter ~ 4.0 mm;
• sheath made of gray PVC (RAL 7032), outer diameter of 5.0 mm.

NETSET UTP cat 5e LAN cable is manufactured in compliance with:
IEC 61156-6 (2000), ISO/IEC 11801 (2000), ANSI/TIA/EIA-568-A (1995), EN 50173 (1999), yd/t1019-2001 standards.

The manufacturer guarantees stability of the parameters given in the "Specifications" at least for 15 years, on the condition that the cable is packed, transported, installed, and used according to adequate European standards (among others E-79100 and EN 50174-1), within the permissible environmental conditions (see the "Specifications" below).

The NETSET UTP cat 5e cable can be used in a wide temperature range: -20^oC...+70^oC, and installed between 0^oC and +50^oC. Minimum bending radius factor (radius to diameter ratio) is 8.

Name	NETSET BOX UTP 5e
Structure
Conductors	solid copper wires Ø 0.50 mm (24 AWG)
Wire insulation	PE
Sheath/jacket	PVC (gray, RAL 7032)
Outer diameter [mm]	5.0 ±0.3
Copper content [kg/km]	14.9
Weight [kg/km]	28.5
Electrical parameters
Wave impedance [Ω]	100 ±15
Capacitance of any transmission path at 1kHz [nF/km]	50 ±1
Nominal Velocity of Propagation (NVP) [%]	67
Resistance of any transmission path [Ω/km]	≤ 188
Asymmetry in capacitance of transmission paths to the ground [pF/km]	≤ 1600
Insulation resistance [MΩ/km]	> 500
Installation and operation
Operating temperature range [oC]	-20...+70
Operating humidity range [%]	0...100
Installation temperature range [oC]	0...+50
Minimum bending radius [radius to diameter ratio]	>8